Shark Vacuum Cleaner Filters
The shark vacuum cleaner is well known in the market, and for good reason. These vacuum cleaners will work amazingly well if you clean them regularly.
You should clean your Shark vacuum cleaner at least once a year or more often if you are actively using it. Focus your efforts on cleaning the dust collector, filters, brushes and hose to maximize your vacuum’s performance. Also, make sure to clean the vacuum to keep the device looking its best.
This guide will walk you through the various components of the Shark vacuum that you need to clean on a regular basis and the techniques that you can use.
Shark Vacuum Filters
How to clean a shark vacuum?
It is very important that your Shark vacuum clean thoroughly from time to time. This deep cleaning ensures that all of your parts are working as efficiently as possible, giving you the best cleaning experience you can count on.
It helps a lot to tackle a deep clean with an organized Shark vacuum. This ensures that you clean all the most important details and don’t miss a thing.
Here are the different components of the Shark vacuum cleaner to clean without much consistency:
1. Pot of powder
As the shark vacuum cleaners suck up all the dirt , dust and other debris, it will put it all in the dumpster. This is the last resting place for all this dust, so it will fill up pretty quickly if you clean the dirty area.
Unfortunately , a dust can filled with dirt will reduce optimal airflow, causing your Shark vacuum to quickly lose its suction power. Therefore, the dust bin is undoubtedly one of the most important parts that you should clean on a regular basis.
To clean the vacuum on your Shark vacuum, first remove it from the device. Then throw all the powder into a trash can or a plastic bag that can be tied. You must seal the package immediately, as a large amount of fine powder will be released into the air you inhale into your lungs.
Once you have emptied the powder canister, you can also wash it to remove any powder residue. Again, warm soapy water and a sponge is enough to keep the bowl looking like new.
After washing, allow to air dry for at least 24 hours. Until you hook it up to the Shark vacuum because you want the moisture it needs to evaporate naturally.
All Shark vacuum cleaner models have one or more filters in the device. Vacuum filters come in a variety of forms, such as standard felt filters and high-efficiency filters. Solid Particulate Air (HEPA) filters
Regardless of their type, they have a specific purpose: to remove impurities from the air that passes through the vacuum, making sure they don’t kill important components like the motor.
After several uses of the vacuum cleaner, these filters quickly become saturated with dirt and dust. If this saturation deteriorates, the filters will begin to restrict airflow through them. That’s why you should regularly clean Shark vacuum cleaner filters and replace them when they’re worn out.
To clean Shark vacuum filters, first locate and identify them. You can then refer to the user manual to find unique filters for your model of vacuum cleaner.
Then remove these filters and tap them gently on the debris side to remove large bits of dirt. Do not wash the felt filters as this may damage them. Instead, focus on removing as much dirt as possible from your surface.
However, foam filters and HEPA filters are safe to wash. Simply use warm soapy water to thoroughly clean them. Then allow these filters to air dry for at least 24 hours so that all moisture evaporates.
3. Brush Roller
If your Shark model vacuum cleaner has a rotating brush, you should thoroughly clean this part as well. This is the part that is in direct contact with the ground, so it can be argued that it is very dirty. After all, you catch a lot of hair and dust when you comb the floor or carpet.
Depending on how long it’s been since you last cleaned, there may be a thick layer of dirt around the brushroll. Unfortunately, it’s nearly impossible to untangle this layer, but luckily there’s a simple trick that will help remove it.
Take a pair of scissors and cut a thick layer around the brush. At the same time, be careful not to accidentally cut the bristles on the roll. Once you’ve cut all the way through, you can start removing dirt and hair, piece by piece.
When the large layer has disappeared, you can use a brush to remove the dirt and soak the brush in water. Then, as usual, let the brushroll air dry for at least 24 hours before using it in the vacuum again.
The next part you need to pay attention to is the Shark vacuum hose. If the vacuum sucks up dust, this dust will move along the hose on its way to the container. Unfortunately, dust can get stuck inside and cause a gradual buildup.
As this buildup becomes more severe, the airflow through the hose and the overall suction power of the vacuum will weaken. That’s why cleaning a hose is a good idea, even if you think there’s nothing stuck inside.
Fortunately, the cleaning process is very simple. Start by disconnecting the hose from both ends and take it to the garden or bathroom. Then use a hose to spray water on one end of the vacuum hose at a time and rinse out anything that is stuck inside.
Repeat this process with both ends of the vacuum hose to make sure you remove any dirt or debris from inside. Then let the hose dry at least until the next day.
5. Final External Cleaning
After cleaning all the parts mentioned above and letting them dry thoroughly, it’s time to reassemble the Shark vacuum. But wait, there is another part that needs to be cleaned!
Be sure to thoroughly clean the Shark vacuum to remove dust and stains from the exterior of the device.
This ensures that your Shark vacuum cleaner will look its best when you push it to clean your home.
Here are some other frequently asked questions (FAQs) you may have about cleaning a Shark vacuum cleaner.
How often should you vacuum sharks?
You should thoroughly clean your Shark vacuum at least once a year. However, you should clean it more often if you use the device frequently. That said, a powder canister is an exception. You should clean and tidy this part weekly to maximize airflow and vacuum suction.
What happens if you don't vacuum your shark often?
If you don’t clean your Shark vacuum regularly enough, dust will collect inside the dust collector. In addition, lumps and blockages can also occur in parts such as filters and hoses. All of this dust will restrict airflow through the Shark vacuum, causing a loss of suction power.
How to clean a hose on a shark vacuum cleaner?
Cleaning the Shark vacuum cleaner hose is very easy. First, disconnect it from both ends and pull it out. Then use a garden hose or something similar to wash all the dirt out of the hose. To be careful, be sure to repeat the process on both ends of the hose.
Can I wash the container in a shark vacuum?
Yes, you can wash the Shark vacuum canister with warm soapy water. However, you should let it air dry for at least 24 hours before you connect it to the vacuum. This way, all the moisture will evaporate before the container is used again.
Can the shark HEPA filter be rinsed?
Yes, you can rinse the Shark HEPA filter if you give it enough time to dry. 24 hours is a rule of thumb to ensure that all moisture has dried and air can pass through the HEPA filter without any problem.