How to polish vinyl floors?
How to polish a vinyl plank floor?
Vinyl flooring is a very popular alternative especially for kitchen and bedroom flooring. But if you don’t give it proper care, they tend to become dull.
One way to prevent this from happening is by caring for your gloss vinyl floors with vinegar and jojoba oil.
Using vinegar or apple cider vinegar to clean vinyl floors daily is a great alternative to polish and keep them clean. This element is not too strong or abrasive so it will not damage the vinyl flooring.
You must mix the vinegar with the water in the proportions that we mentioned above and apply it with a mop. If you want your vinyl floor polishing strategy to be even more effective, just add a few drops of jojoba oil to the mix. This is ideal for treating dull or even scratched areas.
We recommend applying the oil to the mixture 2-4 times a week to keep the floor looking beautiful.
What not to do on vinyl plank floor surfaces?
Knowing how to clean vinyl flooring is basic, you must do it correctly. Also in everyday life at home, you must know what not to do to avoid further damage.
- Avoid scrubbing too hard, as this will remove the shine from the vinyl floor
- Never use a knife to remove dry substances that have stuck to the ground. This will leave a permanent mark
- Do not use abrasive cleaners. These are not good for polishing sintasol soil
- Do not let the vinyl floor get too wet, this will damage the glue under the vinyl. If something spills be sure to dry it up quickly
- Avoid having furniture with wheels because these will leave marks on the floor
- Never use ammonia or bleach to clean vinyl floors
- Do not use the vacuum with the brush as it could scratch the floor
Our basic recommendation is that you prefer the above mentioned vinegar cleaner when cleaning this surface. If you choose a commercial one, it must be specifically indicated that it is one of the cleaning products for vinyl floors. Also, check some of the best vacuum for luxury vinyl plank floors.
Steps to remove glue from vinyl plank flooring
If you decide to remove the vinyl flooring to replace it, don’t worry. It is a simpler task than you think.
- The first step is to remove the adhesive vinyl tiles. When you remove them, you will notice that there will be traces of glue on the floor that was underneath
- To begin removing glue from vinyl flooring, you need mild thinner or thinner. It is important to mention that this element will eliminate the shine of the floor that is under the vinyl. Especially if it is made of marble, ceramic materials or wood
- Another option is to use a degreasing cleaner. These, unlike solvents, are not so aggressive and do not damage the surface of the floor
- If the floor is concrete, you can pour hot water on the areas that have glue residues. After a few minutes scrape off the adhesive with a putty knife. This should come out easily.
