How to Clean Textured Ceramic Tile Floors – Winning Tactics
Cleaning of Textured Cermaic Tile Floors
Ceramic surfaces are quite common in tiles or tiles in bathrooms or kitchens; And by the way, they always look so much better when kept clean and shiny.
Always remember: Before carrying out any of these methods to clean ceramics, first carry out a small test in an inconspicuous area and do not forget to always follow the instructions on the label and wear gloves.
To give your floors and ceramic tiles a shine, wipe them with a soft, dry cloth.
How to clean textured ceramic tile floors?
Tips for cleaning ceramic: Kitchen or Bathroom floors
There are many products for cleaning ceramics that you surely already know and that are very effective for both cleaning and disinfecting. Here we offer you a simple guide to help you, but always remember to read the instructions on the label.
Sweep the floor with a broom or use a vacuum cleaner. The important thing is to remove all the dust and lint. Do not forget to pay attention to the joints, where a lot of dirt tends to accumulate. Some vacuum cleaner accessories are especially useful for this.
Take a bucket and fill it with warm water.
I added a bit of your favorite ceramic cleaner.
Pass a soft cloth dampened in the solution and scrub the entire surface. Starting in a less visible area, like a corner. Do not use any abrasive element, such as virulan, as they can scratch the ceramic.
Use a discarded toothbrush to clean the tiles.
Pass another cloth moistened with clean water.
To give the floors a higher shine, wipe with a dry cloth.
Here’s another method using a homemade cleaning solution:
Prepare a solution of half a liter of water and two tablespoons of ammonia.
To begin with, it is advisable to test the solution on an inconspicuous surface.
Using a clean rag, wipe the solution over the entire surface to remove any grease or scale buildup.
With the help of a disused toothbrush, rub the joints well.
Pass another clean cloth moistened with clean water.
For a glossier effect, dry thoroughly with a soft, dry cloth.
How to clean ceramic with vinegar?
Fill a bucket halfway with warm water and add a cup of vinegar to it.
After having carried out a test in an inconspicuous area, gently rub the entire surface with a clean cloth (do not use any abrasive element such as virulan, as it can scratch the material).
With the help of an old toothbrush, scrub the joints of the tiles or tiles to clean the deposits of tartar or accumulated dirt.
Wipe with a cloth dampened with clean water.
For extra shine, wipe with a dry cloth.
How to clean ceramics in the patio?
Mix in a bucket of water with a little detergent. Test the solution on a small surface before use.
Dampen a rag in the bucket and pass it over the entire surface and especially in the corners.
Let dry.
We hope that these tips on how to clean ceramic tiles floors will help you to leave your floors and tiles looking like new. The ideal is that you do not let yourself be and that you can incorporate the habit of cleaning once a week. Now ceramic cleaning is no longer a problem for you!
Joints and corners can get quite dirty. Toothbrushes can be very helpful in cleaning those hard-to-reach areas. You can prepare a cleaning solution with vinegar, ammonia and detergent. A pre-use test is recommended on an inconspicuous area on the ceramic.
